Code 2328
2328 2K Stucco poliestere a base di alluminio
Masilla de poliéster 2K con aluminio
Two-component aluminium-based paste filler, it is an extremely tough and resistant product, while retaining extraordinary spreadability and sandability characteristics. Its main use is on aluminium body shells and for the reconstruction of missing bodywork parts. Thanks to its innovative formulation, it is suitable for threading and drilling and can also be used successfully to replace certain welds.
Pack sizes
- Aluminio · 6 × 1 kg
Technical data
- Mixing ratio
- 100:1-3
- Hardener
- Peróxido
- Pot life
- 5 min a 20°C
- Viscosity
- 3000±2000 Pas (MI002B; 25°C)
- Coats
- Sin límite; varias manos finas, esperando el secado de la anterior
- Touch-dry
- 20-30 min a 25°C / 10 min a 40°C
- Sandable
- 1 h a 25°C / 20 min a 40°C
- Recoatable
- Sí: fondos acrílicos/epoxi 2K, acabados 2K; no: bases opacas 1K, nitro
- VOC
- 41±2 gr/L (ASTM 2369)
- Substrates
- Madera, plásticos, hormigón, hierro, acero zincado, aluminio, fibra y compuestos
- Application temperature
- 15-32 °C
Source: manufacturer's datasheet. If in doubt, the datasheet prevails.
Used with
Body fillers
View all
Information supplied by the manufacturer, for guidance only. Before using the product, always check its current technical and safety data sheets: they take precedence over this page. For professional use. Photos and logos belong to the manufacturer and are indicative only: packaging, label or the formulation itself may change without notice. Legal notice