Code 2327
2327 Stucco poliestere a base di vetroresina
Masilla poliéster universal con fibra de vidrio
Polyester putty with fiberglass. Thanks to the large quantity of long fibers, the product has very high mechanical resistance and good filling properties.
Pack sizes
- Neutro · 6 × 1 kg
- Neutro · 6 × 2 kg
Technical data
- Mixing ratio
- 100 : 1-3 en peso (resina : peróxido)
- Hardener
- Peróxido de benzoilo en pasta
- Pot life
- 5' a 20°C con hardener estándar
- Viscosity
- 950±100 Pas (25°C)
- Coats
- Varias manos finas; sin límite, esperando el secado de la anterior
- Dust-free
- 10' a 25°C (tiempo entre manos)
- Touch-dry
- 20-30' a 25°C; 10' a 40°C
- Forced drying
- 40°C: tacto 10', lijable 20'
- Sandable
- 1 h a 25°C; 20' a 40°C
- Recoatable
- Sí: acrílico/epoxi 2K, acabados 2K, alquídicos; no: bases opacas 1K, nitro
- VOC
- 60±2 gr/L (ASTM 2369)
- Colours
- Verdoso (aspecto secado)
- Substrates
- UP-GF, hierro/acero, fundición, madera; no directo: aluminio, zinc, cobre
- Application temperature
- 15-32 °C
Source: manufacturer's datasheet. If in doubt, the datasheet prevails.
Used with
Body fillers
View all
Information supplied by the manufacturer, for guidance only. Before using the product, always check its current technical and safety data sheets: they take precedence over this page. For professional use. Photos and logos belong to the manufacturer and are indicative only: packaging, label or the formulation itself may change without notice. Legal notice