S.100 NITROCAR
Esmalte nitro mate de alta calidad
High-quality nitro enamel with a matt or glossy appearance, based on first-choice nitro resins modified with alkyd resins specific for combined nitro compounds. This product is multipurpose and is suitable for painting metal joinery, agricultural machinery, metal window frames, iron profiles, etc., provided that the substrates are free from rust, grease, and mill scale and are properly treated with suitable anticorrosive primers. Thanks to its chemical base, it is a very fast-drying and extremely easy-to-use product.
Pack sizes
- 6 × 0,75 L
- Blanco · 4 × 4 L
- 6 × 0,75 L
- Negro · 4 × 4 L
- 6 × 0,75 L
- Aluminio · 4 × 4 L
- 6 × 0,75 L
- Negro · 4 × 4 L
Technical data
- Thinner
- T105
- Dilution
- 30-35%
- Spray gun
- Aerógrafo a gravedad convencional, Ø 1,3-1,5 mm
- Pressure
- 1,8-2,2 bar
- Coats
- 2 manos llenas (50-60 µm ±)
- Film thickness
- 25-30 µm/mano; total 50-60 µm
- Dust-free
- 10-15’ a 20°C; 5’ a 60°C
- Touch-dry
- 15-20’ a 20°C; 10’ a 60°C
- Handling dry
- 45-60’ a 20°C; 20’ a 60°C
- Forced drying
- 60°C: polvo 5’, tacto 10’, profundidad 20’
- Recoatable
- 10-15’ a 20°C
- Coverage
- 7-8 m²/L
- VOC
- 619,24
- Colours
- Blanco, negro
- Gloss
- 15-20 gloss (indicativo)
- Substrates
- Aluminio, acero, acero galvanizado, plásticos, composites y madera
Source: manufacturer's datasheet. If in doubt, the datasheet prevails.
Used with
1K topcoats
View all
Information supplied by the manufacturer, for guidance only. Before using the product, always check its current technical and safety data sheets: they take precedence over this page. For professional use. Photos and logos belong to the manufacturer and are indicative only: packaging, label or the formulation itself may change without notice. Legal notice