Code 8700
8700 1K PLASTIC PRIMER
Promotor de adherencia 1K para plásticos
Colorless primer with very rapid drying that increases the adhesion of primers and enamels on various types of plastics, (including polypropylene and its blends).
Pack sizes
- 12 × 0,5 L
- 6 × 1 L
- 12 × 400 ml
Technical data
- Thinner
- Listo al uso
- Pot life
- Monocomponente, sin pot-life
- Viscosity
- 10” (±2) ASTM 4 a 20°C
- Spray gun
- Aerógrafo de gravedad convencional 1,0-1,2
- Pressure
- 2,0-2,2 Bar
- Coats
- 2 manos llenas
- Film thickness
- >7-8 µm por mano
- Dust-free
- 10’-15’ a 20°C; 5’-10’ a 60°C
- Touch-dry
- 20’-25’ a 20°C; 10’-15’ a 60°C
- Forced drying
- A 60°C: al polvo 5’-10’, al tacto 10’-15’, en profundidad 60’
- Sandable
- Plásticos en general: lijar con fibra abrasiva muy fina
- Recoatable
- 10’-15’ a 20°C; apto: fondos 2K, bases 1K, acabados 2K, nitro
- Coverage
- 14-15 m²/L
- VOC
- VOC (filler): 2004/42/IIB(e)(840)840
- Colours
- Transparente
- Substrates
- Plásticos en general y soportes compuestos; no metales ni soportes pintados
Source: manufacturer's datasheet. If in doubt, the datasheet prevails.
Primers
View all
Information supplied by the manufacturer, for guidance only. Before using the product, always check its current technical and safety data sheets: they take precedence over this page. For professional use. Photos and logos belong to the manufacturer and are indicative only: packaging, label or the formulation itself may change without notice. Legal notice