Code 461
461 1K ALL IN ONE
Imprimación acrílica universal 1K multifunción


1K primer filler based featured by direct adhesion on various surfaces (aluminium, galvanized, plastics). Also available in spray and in various shades.
Pack sizes
- Gris medio · 6 × 0,75 L
- Gris claro · 6 × 0,75 L
- Gris oscuro · 6 × 0,75 L
- Blanco · 6 × 0,75 L
- Negro · 6 × 0,75 L
Technical data
- Thinner
- T105-T405
- Dilution
- 5/15/25 g de T105-T405 por 100 g de Serie 461, según uso
- Pot life
- Sin pot-life (producto monocomponente)
- Viscosity
- 30-35'' (relleno), 20-25'' (aislante), 18-22'' (adherente), Ford Cup 4/23°C
- Spray gun
- Aerógrafo de gravedad de alto rendimiento, Ø 1,6-1,8
- Pressure
- 1,8-2,2 bar
- Coats
- 3 (relleno), 2-3 (aislante), 2 (adherente)
- Film thickness
- Relleno >40<50; aislante >25<30; adherente >18<22 µm/mano
- Dust-free
- 10-12' a 20°C; 5-8' a 60°C
- Handling dry
- 60-70' a 20°C; 20' a 60°C (en profundidad)
- Forced drying
- 60°C: fuera polvo 5-8'; profundidad 20'
- Sandable
- A mano: seco 600-1000, al agua 320-800; máquina: seco 400-600
- Recoatable
- 15-20' a 20°C
- Coverage
- 5-7 m²/L
- VOC
- 2004/42/CE IIB(e)(840)667
- Colours
- Gris medio, gris claro, gris oscuro, blanco, negro
- Substrates
- Aluminio, acero, chapa galvanizada, cataforesis, plásticos, composites
Source: manufacturer's datasheet. If in doubt, the datasheet prevails.
Used with
2K fillers
View allInformation supplied by the manufacturer, for guidance only. Before using the product, always check its current technical and safety data sheets: they take precedence over this page. For professional use. Photos and logos belong to the manufacturer and are indicative only: packaging, label or the formulation itself may change without notice. Legal notice




